Littlebits STEAM STUDENT SET Invention Manual Download

Page: 74 / 76

WARNING

• This product contains small

magnets. Swallowed magnets can stick

together across intestines causing

serious infections and death. Seek

immediate medical attention if

magnets are swallowed or inhaled.

• Most Bits are small parts. DO NOT

allow children under 3 years old to

play with or near this product.

• NEVER connect any modules or

circuits to any AC electrical outlet.

• Do not touch or hold any moving

parts of modules while they are

operating.

• Keep conductive materials (such as

aluminum foil, staples, paper clips,

etc.) away from the circuit and the

connector terminals.

• Always turn off circuits when not

in use or when left unattended.

• Never use Bits in or near any

liquid.

• Never use in any extreme

environments such as extreme hot or

cold, high humidity, dust or sand.

• Bits are subject to damage by

static electricity. Handle with care.

• Some modules may become warm to the

touch when used in certain circuit

designs. This is normal. Rearrange

modules or discontinue using if they

become excessively hot.

• Discontinue use of any Bits that

malfunction, become damaged or broken.

VERY IMPORTANT NOTE

• Several projects in this kit

involve the use of sharp objects.

These tools should be used ONLY

under direct adult supervision.

BATTERIES

• non-rechargeable batteries are not

to be recharged

• rechargeable batteries are to be

removed from the product before

being charged

• rechargeable batteries are only to

be charged under adult supervision

INSTRUCTIONS

We recommend using littleBits brand

9-volt batteries, but standard

alkaline or standard rechargeable

batteries may also be used. Properly

discard and replace exhausted

batteries.

• Do not connect the two battery

terminals to any conducting

material.

CARE AND CLEANING

Clean Bits ONLY by wiping with a

dry cloth. If necessary, isopropyl

alcohol on a cloth may be used

sparingly, and then wipe with a dry

cloth.

DO NOT use any other cleaning

products on modules.

RADIO AND TELEVISION INTERFERENCE

FCC ID: SH6MDBT40

This device complies with the limits

for a Class B digital device,

pursuant to Part 15 of the FCC

rules. Operation is subject to the

following two conditions:

1) This device may not cause harmful

interference, and

2) this device must accept any

interference received, including

interference that may cause

undesired operation.

These limits are designed to provide

reasonable protection against

harmful interference in a residential

installation. This equipment

generates, uses and can radiate

radio frequency energy and, if not

installed and used in accordance

with the instructions, may cause

harmful interference to radio

communications. However, there is no

guarantee that interference will not

occur in a particular installation.

If this equipment does cause harmful

interference to radio or television

reception, which can be determined

by turning the equipment off and on,

the user is encouraged to try to

correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving

antenna.

• Increase the separation between

the equipment and the receiver.

• Connect the equipment into an outlet

on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced

radio/TV technician for help.

Changes and modifications not

expressly approved by the

manufacturer or registrant of this

equipment can void your authority to

operate this equipment under Federal

Communications Commissions rules.

GOT A QUESTION?

Visit littleBits.cc/faq for

troubleshooting and additional

support.

littleBits Electronics Inc.

601 W 26th Street, M274

NY, NY 10001

(917)464-4577

www.littleBits.cc

Released under CERN Open Hardware

License, Version 1.2

Inc.

2016 littleBits Electronics, Inc.

Made in China

littleBits, Bit, Bits, Circuits in

Seconds, and Make Something That

Does Something are trademarks of

littleBits Electronics, Inc.

All other marks are the property of

their respective owners.

CONTINUE YOUR

INVENTOR JOURNEY

The inventing doesn’t stop here!

Discover new friends, new

challenges, and new invention

adventures online and on the

littleBits

Invent App.

COMMUNITY

Find a local littleBits Chapter

or share your questions and

ideas on our forum.

MORE INVENTIONS!

See what other Inventors

have made with littleBits.

MORE CHALLENGES!

Take on new challenges

and submit your solutions.

MORE BITS!

Add Bits and Kits to your

collection for bigger and

better inventions!

EXPLORE LITTLEBITS.CC AND THE LITTLEBITS INVENT APP FOR...

Summary of Contents for STEAM STUDENT SET













































































Search results

Summary of Contents for STEAM STUDENT SET

Reviews:

Related manuals for STEAM STUDENT SET

Brands by name

Popular brands

Littlebits STEAM STUDENT SET, Invention Manual

Search results

Summary of Contents for STEAM STUDENT SET

Reviews:

Related manuals for STEAM STUDENT SET

Brands by name

Popular brands