1-33
January 24, 2017
Machine Inspection Table
CLG835H
Static check
15
Visual check: there is no interference between hydraulic oil tank and cab; there is no interfer-
ence between left and right hydraulic oil tank guard, foot pedal and driver
16
Visual check: diesel engine mounting bolt is fastened and there is no oil leakage at parts on left
side and oil pan; there is no interference between diesel engine oil pan and sub frame, rear
frame beam; no interference between diesel engine torque converter assembly oil return pipe
joint and intermediate plate of frame
17
Visual check+touch: there is no water leakage at upper and lower water pipe, cool and warm
water pipe and water valve; there is no oil leakage at pipe joints of filter, high pressure oil pump,
flywheel housing cover;
18
Visual check: there is no interference between brake line at left side of engine, filter and sharp
edges (harness is far away from high temperature area and not interfered with fuel pipe); there
is no interference between filters and sharp edges and other parts, and the hoses are not
twisted;
19
Visual check: urea heating pipe, cool water pipe, diesel particle filter water pipe runs smoothly
without interference and is far away from high temperature area.
20
Visual check: arrow of solenoid water valve shall face the urea tank.
21
Visual check: harness at upper side of diesel particle filter is far away from high temperature
area.
22
Visual check: A/C pipe runs smoothly and is not interfered with other parts, diesel engine high
temperature area and the exposed A/C aluminium pipe is not interfered with other parts.
23
Visual check: the pulley belt is not twisted and peeled off; and the A/C compressor pulley is in
the same horizontal plane with diesel engine pulley;
24
Visual check: clearance between engine fan and shroud is
≥
10mm, fan guard
≥
1
5mm; the pul-
ley is not interfered with fan guard
25
Visual check + touch: there is no water and oil leakage at radiator assembly and its radiator pipe
joint;
26
Visual check+touch: there is no oil leakage at rear axle input flange, axle housing and plug, pipe
on axle, left and right clamp, breather; axle brake hose joint is not interfered with oil pan;
27
Visual check+touch: there is no oil leakage at radiator pipe at right side of engine, fuel pipe,
brake pipe, filter; there is no interference between filters and sharp edges and other parts, and
the hoses are not twisted
28
Visual check +touch: there is no oil leakage at radiator pipe reversing valve, fan pump joint;
29
Inspection of quick coupler: lower the bucket to the ground, shut it off and close the pilot shutoff
valve to OFF position. Turn the spool lever to COUPLER, start the machine, open the pilot shut-
off valve to OPEN. Operate the multi-functional pilot lever, and check the quick coupler frame
movable pin for free extending and retracting. Turn the engine off, close the pilot shutoff valve to
OFF position, and turn the spool lever to Aux position.
Inspec-
tion item
S/N
Inspection method and acceptance criteria
Summary of Contents for CLG835H
