Unscrew/pull out the crown to
position III
(Second hand stops. The
display changes from alarm time to
reference time.)
Activating the setting mode
Short press
(less than 1 second):
Press the push-button for at least 2
seconds. As soon as the
small minute
hand
jumps forwards one minute this
mode is active.
The reference time moves forward by
the minute.
SETTING THE REFERENCE TIME
2
1
3
2
1
What is the reference time?
The current time is displayed by means of the hour and minute hand.
Parallel to the current time, the reference time runs in the background; the alarm time refers itself to this reference time. Thus,
resetting the time also requires correction of the reference time.
If the reference time is not synchronized with the current time, the alarm signal will sound at a different time than the set
alarm time.
User’s Manual
Caliber
14
User’s Manual
CONTINUED
11
3
4
Medium press
(1-2 seconds):
The reference time moves forward
by the hour.
Long press
(Longer than 2 seconds):
The reference time moves forward
until the push-button is released.
Push the crown back into position I
and screw down
The display changes from reference
time to alarm time.
A 1-beep signal indicates that the
alarm is switched off.
Please note:
The reference time must display the same time as the current
time. This means that resetting the current time also requires
correction of the reference time. Afterwards, the alarm time
has to be reset.
I II III
I II III
I II III
Reference
Time
Reference
Time
Reference
Time
4
Summary of Contents for Caliber 10
Page 1: ...User s Manual DARE TO LIV...
Page 30: ......
