SETTING THE TIME & DATE
2
3
Unscrewed / Manual Winding Position
1
Screwed in and flush with the case
0
Rapid Date Change
2
Time change
3
User’s Manual
Make sure that your watch is perfectly dry.
Unscrew the crown and move it to position 1 to manually wind the watch 20 times.
Move it to position 2 to set the date.
Move it to position 3 to set the time.
Avoid changing the date between 8:00 pm and 4.00 am.
Once the changes are made, push the crown back in and screw it down against the case to preserve
its water-resistance.
When a mechanical self-winding watch is not worn for a certain amount of time, its power reserve (in
this case, 38 hours) is exhausted and the watch stops. To restart it, unscrew the crown to position 1
and wind the movement manually by turning the crown 30- 40 times. This will give it a sufficient
power reserve to function normally.
INSTRUCTIONS:
0 1 2 3
POSITION
POSITION
POSITION
POSITION
