14 GB
Press the button on the
remote control to switch the
LED strip
2
on or off.
Please remember the power
supply will continue to draw
a small amount of electricity
even without the light being
operated so long as the
power supply
3
is plugged
into the socket. To switch the
product off completely, unplug
the power supply
3
from the
socket.
Controlling the
light effects using
the remote control
Note:
Please refer to the included
instructions for use for the remote
control for a detailed description
of the remote control
7
functions.
The remote control has 24 buttons.
These buttons can be divided into
the following groups:
Static colour selection
buttons
CS
C3
C7
C16
w/cw
These buttons control the
colour mode of the entire
LED strip. Combined with
the light program buttons
you can define the colour
selection of most light pro-
grams.
Light program buttons
Auto
Flash
Jump
Meteor
The LED strip
features
14 different
light programs.
Preselecting the
colour using the
colour selection
buttons will set
the colour range of these light
programs. This does not apply to
the “Auto“ program.
Parameter buttons
IC Set
Use the arrow
buttons to adjust
the brightness of
the LED strip in
static colour
mode. Whilst the colour program