LIVARNO LUX 3000.063.080, Assembly, Operating And Safety Instructions

13 

GB/IE

Introduction / Safety

Parts Description

1

  Upper LED unit

1 a

  Outer LED strips

2

  Socket head screws 

3

  Hex key (medium size)

4

  ON / OFF switch (incl. dimmer function)

5

  Main tube incl. dimmer and power cord

6

  Power cord with connection plug

7

  LED driver

8

  Lamp base

9

  2 Socket head screws (large)

10

  Hex key (large)

11

  Socket head set screw

12

  Hex key (smallest size)

13

  Connection plug (upper LED unit)

14

  Connection plug (main tube)

Technical Data

Model no.: 

3000.064.080

Power input: 

 max. 22 Watt (LED modules 
not replaceable)

Switching cycles: 

> 15,000 

Life: 

25,000 h 

Total height: 

approx. 187 cm

Protection  class: 

II / 

LED driver:

Model: EIP021V0240PSS
Input  voltage: 

220–240 V∼,  50 / 60 Hz

Output  voltage: 

24 V

Output current: 

 0,88A (3000.063.080 / 
3000.064.080)

Protection  class:  II / 

 Safety

Safety instructions

Damage due to failure to comply with these instruc-
tions for use will invalidate the warranty! We assume 
no liability for consequential damages! We assume 
no liability for property damage or personal injury 

due to improper handling or failure to comply with 
the safety instructions!

DANGER TO 

LIFE AND RISK OF ACCIDENT 
FOR INFANTS AND CHILDREN!

Never leave children unsupervised with the 
packaging material. The packaging material 
poses a suffocation hazard. Children frequently 
underestimate the dangers. Please keep the 
product out of the reach of children at all times. 
This product is not a toy.

   This device may be used by children aged 8 

years and up, as well as by persons with reduced 
physical, sensory or mental capacities, or lack-
ing experience and / or knowledge, so long as 
they are supervised or instructed in the safe use 
of the device and understand the associated 
risks. Do not allow children to play with the de-
vice. Cleaning and user maintenance should not 
be performed by children without supervision.

Avoid the risk of fatal injury 
from electric shock

Check the lamp for possible damage before 
every use. Never use the light if it shows any 
signs of damage.

 CAUTION! 

A damaged light means danger 

of death from electric shock. In the event of dam-
age, repairs or other problems with the light 
please contact the service centre or a qualified 
electrician.

To avoid hazards, if the external flexible lead 
on this lamp is damaged it must be replaced by 
the manufacturer, their service representative or 
an equivalent professional!

Before use, verify the available mains voltage 
matches the required operating voltage of the 
light  (220–240 V∼,  50 / 60 Hz).

Ensure that the light does not come into contact 
with water or other liquids under any circum-
stances. Always unplug the LED-Driver prior to 
assembly, disassembly, cleaning, or if the light 
will not be used for extended periods.

Introduction