43
LLL 72 A1
GB
MT
Adjusting the magnifi cation lamp
Remove the allen key on the bottom of the pedestal
♦
5
.
Loosen the allen head screw at the joint
♦
3
of the pedestal
5
and adjust the
tilt of the swivel arm as required.
Retighten the allen head screw to fasten the swivel arm.
♦
Reattach the allen key to the bottom of the pedestal
♦
5
.
Adjust the tilt of the lampshade with the aid of the universal joint
♦
2
.
Using the magnifying glass
Open the magnifying glasses lid by pulling on the strap
♦
.
Look through the magnifying glass from above to see small objects enlarged
♦
under the lampshade. Change the distance between the magnifying glass
and the object to adjust the focus.
When you no longer require the magnifying glass close the lid again.
♦
Troubleshooting
Malfunction causes and remedies
The following table will assist with localisation and remedying of minor malfunctions:
Defect
Possible cause
Solution
Device does not
switch on.
The plug is not inserted.
Insert the plug into the mains power
socket.
Mains power socket is not
supplying voltage.
Check the mains power fuse.
NOTICE
If you cannot solve the problem with the aforementioned methods please
►
contact customer service.
Buch_69126_LB5.indb Abs3:43
Buch_69126_LB5.indb Abs3:43
12.09.2011 13:37:15 Uhr
12.09.2011 13:37:15 Uhr
