9
GB
Using the LED magnifier light
Plug the mains plug of the light into a properly installed socket.
Move the ON / OFF switch
9
into the
I
position to switch the
light on.
Move the ON / OFF switch into the
0
position to switch the
light off.
Adjusting the LED magnifier light
Never use force when adjusting the light.
The light can be adjusted in different ways:
· The lamp head is pivot-mounted inside the ball joint
8
(Fig. E).
· After loosening the lock screw
6
you can adjust the lamp
head up or down. Tighten the lock screw after adjusting the
light to the desired position.
· The individual parts of the articulated arm
7
can be moved
by the joints
4
.
Using the magnifier
Lift the cover
10
to use the magnifier.
Focus the object you wish to view by changing the distance to the
object and the distance between your eyes and the magnifier.
IMPORTANT:
Keep the cover closed when the magnifier is
not in use. Please note, an open magnifier always poses a fire
hazard as light rays bundled by the magnifier can generate
concentrated heat or a fire.
Cleaning and Care
CAUTION! DANGER TO LIFE FROM ELECTRIC
SHOCK!
For electrical safety, never clean the light with
water or other liquids, or immerse it in water.
Switch the light off before cleaning and unplug from the mains.
Only use a dry, lint-free cloth for cleaning.
Summary of Contents for 276585
Page 3: ...C A 1 2 B 3...
Page 4: ...E 8 9 10 6 D 4 5 7...
