11
COMPUTER OPERA
TION
Manual process
1. AC power on, segments test for 2 seconds (figure 1), the speed setting shows up after a long beep for 2 seconds
(figure 2). The monitor display switches to CLOCK setting in 1 second. To set "Hour" first, press SET button to set
hour and then press MODE button the "Minute" is blinking for setting, press SET button to set minute. The monitor
display will quit set up mode in 6 seconds if not pressing any button. After setting up is done, the monitor will display
training mode that is allowed to preset each function target. (figure 3)
2. After training starts:
(1) If the safety key is installed, press START/STOP button to start the treadmill (figure 4). It is possible to be changed
the running speed by pressing UP button with each increment (or decrement by DOWN button) 0.1 km/h until the
maximum speed 12km/h. If the button has been hold pressed for 1.5 seconds, the increment and decrement will be
double, and stop when the button is released.
Figure 1
Figure 2
Figure 3
