How to Use Your Fan
8
Using the Remote:
Your remote comes with a battery installed and
does not need to be programmed. Before using
your remote for the first time, you must take out the
pull tab. To use remote, make sure to point it at the
front of the unit. The remote will not work when
pointed to the backside of the unit. You should
store your remote on the backside of the unit in the
built-in holder.
It is recommended to replace the battery when
the product takes a long time to respond or stops
responding when the buttons are pressed.
1.
Turn over remote control. Press tab A toward
the right and pull.
2.
Pull out battery holder B and replace the
battery. Only use the specified battery type
(Lithium Button Cell Battery CR2025). The battery
must be installed with the positive side facing up.
3.
Insert battery holder B back into remote.
Note:
Do not apply excessive force to battery
holder. Remove battery when not using for an
extended period of time. When disposing of used
battery, please use the correct method of
disposal.
Replacing the Remote Battery:
3
1
A
2
B
Battery : Lithium Button Cell Battery (CR2025)
WARNING
Keep the lithium battery out of
reach of small children.
Small children may accidentally swallow it.
If swallowed, call your doctor immediately.