Installation and Operating Instructions
Hot Plate Smart
11
/
14
As long as the Hot Plate Smart displays remaining heat above 40°C after switching off, the
temperature display of the touch control panel flashes.
Do not place meals directly on the surface. All meals should always be placed on the Hot
Plate Smart in appropriate vessels.
Do not use pots or pans with a bottom that has burred edges or is badly enamelled.
Do not use the appliance when it is not working properly, is damaged or has been
dropped onto the floor.
§
The hot plate area of the appliance gets very hot during operation. To avoid
burns, do not touch hot parts.
§
Never heat up meals or liquids in closed containers or bottles.
§
The Hot Plate Smart may not be used as a storage surface.
§
Accidental switching on or remaining heat can melt or set fire to objects
placed on it.
§
Only use heat-resistant cookware ( +140 ° C).
§
If the power is interrupted, the flashing signal disappears even if the Hot Plate
Smart is still hot.
§
Do not use accessories and spare parts which have not been recommended by
the manufacturer. These could pose a threat to the user or cause damage to
the appliance and injury to persons. The warranty will be voided.
§
Do not move or tilt the appliance during operation.