background image

Home Charging Station: Features (Continued)

11

Option to turn off Bluetooth temporarily  

There is the option of turning off the station's 
Bluetooth temporarily if you want to take your 
station with you on holidays. To turn off the 
Station’s Bluetooth send this text command to 
your alarm's mobile number:

Charging your alarm

 

The Live Life alarm uses a lithium ion battery like the 
type in a mobile phone. When you receive your Live 
Life alarm, it should have about 80% battery. However 
you may wish to charge it until the light on the side of 
the alarm is steady red.

When placing the device in the charging station, 
ensure it is positioned correctly. In the correct position 
it will click into place and vibrate momentarily and a 
voice will announce the device is charging.

How long it takes to recharge 

The battery will take approximately 45 minutes to 
fully charge if it is very low or flat.

Low battery warning

 

When the battery approaches 20% charge, a voice 
will announce, “Battery is low. Please recharge your 
battery”. The red LED will start blinking. When the 
battery reaches 10% charge, the device will send a low 
battery text reminder to the first emergency contact 
that the battery needs to be recharged. This feature 
will be turned on unless you asked us to turn it off 
during the setup process.

Charging via the Magnetic USB cable

 

You can also recharge the device by attaching 
the magnetic USB cable to the four charging 
contacts on the rear of 
the pendant. A voice will 
announce “Your mobile 
alarm is charging
” when the 
magnetic charger is attached 
correctly.

The device will reply with a confirmation text 
that the low warning has been changed.

To turn low battery warning 

OFF

, send text:

To turn low battery warning 

ON

, send text:

*In this example the low battery warnings 
occur at the default of 20% charge.

The alarm will reply with BLE Loc off, meaning it 
is using Wi-Fi and GPS to find its location. 
To turn on the Station's Bluetooth send this text 
command to your alarm's mobile number:

The alarm will reply with BLE Loc on, meaning it 
is using Bluetooth from the station if available to 
find its location.

Your home  

address

SOS activated

Bluetooth

When you press the SOS/Heart button, the  

pendant first looks to see if the station is within  

Bluetooth range. If the alarm connects to the  
station, it knows it is at home and sends that  

address on Google Maps via text to your  

emergency contacts.

BLE0

Send 

LOW0

Send 

LOW1,20

Send 

BLE1

Send 

Alarm Battery & Recharging

Summary of Contents for LLA





















Reviews: