background image

Using the fall detection feature (Continued)

FL0

Send 

FL1,5,1

Send 

14

Testing the fall detection feature 

When you first receive your Live Life alarm you may 
drop it or gently toss it on a soft material (soft 
carpet) if you want to see the fall alert sequence in 
action. After that, however, we do not advise you to 
attempt to test the fall detection yourself multiple 
times. Every fall is different due to the variables 
involved. Over testing the feature may result in 
injury or damage to the device. Do not deliberately 
drop or throw the device at a hard surface to test it.

What can stop fall detection from working? 

 

Because the device is a pendant on a lanyard or 
chain, it can be worn in such a way that it swings 
during a fall. Because it measures the speed of 
impact using a 3D accelerometer, it is possible a fall 
from a height of less than a metre, such as from a 
sitting position, will not trigger the fall detector.

Performing regular tests of the Live Life mobile alarm 

Like other electronic devices, it is important to conduct regular checks of the alarm 
to make sure it is working correctly. We suggest a monthly health check which 
includes the following:

Turning fall detection ON or OFF 

During setup, fall detection is turned on. You can 
turn this feature ON or OFF by texting a command 
from a mobile phone to the device.

To turn fall detection 

OFF

, text the following 

command to the alarm:

To turn fall detection 

ON

, text the following 

command to the alarm:

Device will reply with “Fall down alarm off!”

Device will reply with “Fall down alarm on!”

= Enable

=

=

Sensitivity
9 most sensitive
1 least sensitive

Call &  
send texts

FL1

5

5

Monthly alarm health check

 Check that the 

“green”

 light on your alarm  

is flashing once quickly every 3 seconds.  
This means that you have a connection to the  
mobile network.

 Ask a relative or friend to call your alarm and you can 
answer in hands-free and two-way voice.   

Click or press the SOS/Heart button until you hear the 
voice prompt. Click the middle SOS/Heart button again 
to cancel the emergency call and text sequence. 

 

 Check your alarm for any obvious signs of damage. 
Make sure the four brass discs on the back of the alarm 
are bright and shiny.

1

2

3

4

Summary of Contents for LLA





















Reviews: