8
ASSEMBLY
STEP 3 & 4
A
turn the rear Adjustment Knob counter
clockwise and pull the adjustment knob to insert
the Saddle post into the Frame. Next, bring
the Saddle post to the desired height, release
the adjustment knob so the pin engages into
the holes of the saddle post. then turn the
Adjustment Knob clockwise to retighten until it
is snug.
B
Mount saddle to the horizontal saddle post as
shown above. Finally, firmly retighten the saddle
mounting clamp and make sure that the saddle
is mounted in its most horizontal position at the
middle of the rail.
C
to adjust the horizontal saddle position, turn the
small adjustment knob counter clockwise, move
the saddle to the desired horizontal saddle position
and retighten the adjustment knob until it is snug.
D
please don’t adjust the height of the vertical saddle
support beyond the stop mark to avoid instability.
STOP mARk
