32
33
SYNCING TREADMILL WITH PASSPORT
™
1) Use the arrow keys on the Passport remote to scroll to
the setup icon and press select.
2) Follow the on-screen prompt to press and hold the
incline up and stop buttons on the console.
3) The message displayed on-screen will notify you if the
sync was a success or failure.
NOTE: See Passport Owner’s Manual for more information.
USING YOUR CD / MP3 PLAYER
1) Connect the included AUDIO ADAPTOR CABLE to the AUDIO IN JACK on the top right of the console and the
headphone jack on your CD / MP3 player.
2) Use your CD / MP3 player buttons to adjust song settings.
3) Remove the AUDIO ADAPTOR CABLE when not in use.
4) If you don’t want to use the SPEAKERS, you can plug your headphones into the AUDIO OUT JACK at the bottom of
the console.
P17-P24)
LIVETRACK
™
INTERACTIVE (CONTINUED)
SAVING WORKOUT DATA TO USB FROM YOUR FITNESS EQUIPMENT
1) Remove the USB protective cover and insert the USB stick.
2) Select “SAVE WORKOUT” using + / – on the programming button. Press enter to confirm.
3) Select USER 1 or 2 using the + / – on the programming button. Press enter to confirm. Your last 5 workouts are now transferred
to the USB stick. NOTE: The transfer may take up to 5 seconds to complete. Do not remove the USB stick while info is
uploading.
4) After the console confirms “UPLOAD COMPLETE,” remove USB stick and replace USB protective cover.
TRANSFERRING WORKOUT DATA TO PC/MAC FROM USB
1) Insert USB stick into an available USB port in your computer.
2) Open your computer’s internet browser and go to
http://www.livestrong.com/equipment
to transfer your workout.
DOWNLOADING A NEW PROGRAM FROM
LIVE
STRONG.COM
1) Insert USB stick into an available USB port in your computer.
2) Open your computer’s internet browser and go to
http://www.livestrong.com/equipment
to download the latest programs.
DOWNLOADING A NEW PROGRAM TO YOUR FITNESS EQUIPMENT
1) Remove the USB protective cover and insert the USB stick.
2) Select “DOWNLOAD PROGRAM” using any + / – on the programming button. Press enter to confirm.
3) Select the desired program using any + / – on the programming button. Press enter to confirm.
4) Select memory slot 1 - 4 to save the desired program to. Press enter to confirm.
NOTE: If memory slot is full with a previously downloaded program, it will be overwritten with the new program. Previous
programs are available for download again from
http://www.livestrong.com/equipment
NOTE: The transfer may take up to 5 seconds to complete. Do not remove the USB stick while info is downloading.
5) After the console confirms “DOWNLOAD COMPLETE,” remove USB stick and replace USB protective cover.
LSPRO1and2_OM_Rev1_9.indd 32-33
8/22/11 4:02 PM
