Troubleshooting
Massage
gun
does not work
Make sure massage
gun
is fully charged. The POWER LIGHT
should illuminate solid blue (not flashing).
RESET PROCEDURE: Reset the massage
gun
by turning power
off. Insert the small plug end of the power adaptor into the
charging connector of massager
gun
and then plug the adaptor
CHARGER into an electrical outlet, wait about three seconds
then unplug both sides of CHARGER and then turn product on to
start massaging.
Specifications
Battery:
11.1V Lithium-ion 2200mA
Charge & operation time: Approximately 180 minutes to fully charge
lasting 90-240 minutes depending on speed level and load applied.
Variable speed change (2,000 rpm-3,500 rpm)
Motor. 12V, DC, 3500 rpm
Powered from AC Plug Pack Power Supply: XH1260-0900LA
Input Voltage: 100V-240V, 50/60Hz, 0.5 A Max
Output Voltage: 12.6V, DC,0.9A
Warranty
For your safety and to avoid any property damage, please read this
manual carefully and use as indicated.
The manufacturer's warranty is void under the following circumstances:
Accident, misuse, abuse, contamination or other external causes.
The use of unspecified adapter and accessories.
Impact damage.
Damage that occurs as a result of one's failure to follow the
instructions.
2
130 0 886 649
A U
11
