Operation procedure:
1.
Insert the mains power adapter into an easily accessible mains
socket outlet
.
2.
Connect the mains power adapter to the supply connecting cable /
socket on the massager (
2
).
3. When used with the upper foot surround (
7
): Place your feet into
the device and in direct contact with the massage nodes.
4. When used without the foot surround: Sit down on a chair with a
backrest and place the massager so that it rests in direct contact
with the desired area of your back.
5. Press the
ON / OFF
button (
8
) to switch on the device.
6. Press the desired button for Direction (
9
) or (
10
).
7. The massage will start to operate. To switch direction, simply press
the corresponding button.
8. Press the Heat (
11
) button for the warming function to operate, this
may take several minutes to generate an increase in temperature.
9. Press the Heat button at any time to switch off / on as desired.
10. After 15 minutes the device will automatically switch off. To switch
off sooner, simply press the
ON / OFF
button once.
11. Disconnect the mains power adapter from the connecting cable /
socket on the device.
12. Pull the mains power adapter out of the mains socket outlet and
clean the device if necessary.
2
130 0 886 649
A U
