background image

OPERATION

A. WHEN USING FOR THE FIRST TIME:

1. Remove the coffee maker from the packaging and check all accessories are provided

(refer product overview).

2. Clean all the detachable components in accordance with the following section of

“CLEANING AND MAINTENANCE”.

3. In order to flush the internal components, operate the appliance according to section “B”

and “C” but with no ground espresso coffee inserted. Repeat 2-3 times, disposing of the

heated water after each use.

B. MAKING ESPRESSO COFFEE:

1. Ensure the surface on which the coffee maker is placed is level, clean and free of water

and other substances and position the coffee maker in a convenient location near a mains

electrical supply socket.

2. Remove the water tank lid by turning it anti-clockwise. Carefully pour the appropriate

amount of water into the tank using the carafe provided.

WARNING:

Do not exceed the

maximum capacity (240ml). Ensure water used is clean and not pre-heated.

CAUTION:

1). the carafe provided has cup level markings, the maximum tank capacity

is equal to the ‘4 cups’ mark (240ml). The minimum tank capacity is equal to the 2 cups

mark (120ml).

2). Before pouring the water into the water tank, be sure the power cord is

unplugged from the power outlet and the control knob is in the

2))

5(/($6(

position.

NOTE

: A standard coffee shot is considered as 30ml, double shot 60ml. The 240ml

maximum capacity equates to 4 cups whereby each cup is a double shot.

3. Replace the water tank lid and turn clockwise until it is secured in position.

4. Fit the detachable filter basket into the Portafilter (filter holder), add ground espresso

coffee into the filter using the measuring spoon.

A spoon of coffee can make

approximately 1 cup of coffee. Fill the filter with coffee to the desired level marking

depending on cups required (ensuring this aligns with water quantity added).

5. Tamping the ground coffee is now required, distribute the ground coffee evenly in the filter

and press down firmly with the tamping end of the measuring spoon and ensure that it is

level. Clean any excess ground coffee from the rim of the Portafilter (filter holder).

NOTE:

The amount of force that is applied to the ground coffee during Tamping, will

directly affect how compacted the coffee is, this in turn affects how the steam passes

through the coffee and the level of extraction. If the ground coffee is lightly compressed,

this will result in reduced extraction and the coffee will be weaker than when compared to

that which has been well compacted, which will result in a stronger flavour.

Some trial

and error may be required to obtain your ideal flavour.

5

1300 886 649

5

Summary of Contents for CM4656

















Reviews: