Power off the treadmill
Press the “speed -” in the machine and ”M” button in the remote control at the
same time, keep pressing for 6 seconds.
Power on the treadmill within 5 seconds, the remote control will match the
machine automatically
(4) How To Match A New Remote Control
(5) Dashboard
4.1
”Start” button
In standby /countdown mode, press the button to start the treadmill. The default
speed is 0.5MPH. In preset mode, press the button, the treadmill will start and act
according to the preset value and accumulate the data.
“Stop” button
In the running state, press this button to stop the exercise and return to the stand-
by mode. Press the stop button for more than 2 seconds, the system restarts.
“Up/Down” button
It is used to adjust the speed after start up, and the adjustment range is (0.1 MPH)
/ time. Keep pressing for more than 0.5 seconds, it will continuously increase or
decrease. It can also be used to adjust the setting value in the setting state.
"Program” button
To select 12 preset automatic programs P01 ~ P12.
"Mode" button
To switch between various modes in standby mode. Including time countdown
(setting range 5: 00 ~ 99: 00), distance countdown (setting range 1 mile ~ 99
miles), calorie countdown (setting range 20 ~ 990). After the treadmill is started,
every window will be displayed cyclically at an interval of 5 seconds. You can press
the "M" button to switch between cyclic display mode and single display mode.
”SAFE KEY” button
In case of emergency, press the ”SAFE KEY” button to cut power instantly.
5.1
5.2
5.3
5.4
5.5
5.5
4.2
4.3
-
P
M
+
