(1) Running belt deviates to left
Start the machine with speed 1-3KM/H (Don't stand on machine). Use the Allen wrench
to turn the screw clockwise until desired fitted (see fig1). Let the machine run without
loading for 1-2 minutes. Please adjust like this until the belt is in the middle.
(2) Running belt deviates to right
Start the machine at speed 1-3 KM/H (Don't stand on machine). Use the Allen wrench
to turn the screw counterclockwise until desired fitted (see fig2). Then let the machine
run without loading for 1-2 minutes. Please adjust like this until the belt is in the
middle.
(3) Running belt stuck
If the running belt is not moving, use the Allen wrench to turn the screws 180 degrees
on both left and right sides until this is solved (see fig3).
1. Please switch off and unplug from power outlet before checking the machine or
clearance.
2. Clean belt and dial plate after use, once every week at least.
3. Do not hang clothes or other objects, etc. on the machine.
9. Belt Adjustment
10. Daily Maintenance