background image

Wake Up

Outdoor

Back Home

Out Door

Back Home

Sleep

6:00

20°C

8:00

15°C

11:30

15°C

13:30

15°C

17:00

15°C

22:00

15°C

NO

Settings Options

Data Setting Function

Factory Default

A1

Measure temperature 

calibration

Change value range -9°C to + 9°C

0.5°C Accuracy 

Calibration

A2

Temperature control return 

difference setting

Change value range 0.5°C to + 2.5°C

1°C

A3

External sensors limit 

temperature control return 

difference

Change value range 1°C to + 9°C

2°C

A4

Options of sensor control

N1:

 Built-in sensor (high temperature protection close).

N2:

 External sensor (high temperature protection close).

N3:

 Built-in sensor control temperature, external sensor limit 

temperature (external sensor detect the temperature is higher 

than highest temperature of external sensor, thermostat will 

disconnect relay, turn off load).

N1

A5

Children lock setting

0: Half Lock          1: Full Lock

0

A6

Limit value of high 

temperature for external 

sensor

1.) 35°C - 75°C

2.) Under 35°C, screen display            , high temperature 

protection was cancelled.

45°C

A7

Limit value of low 

temperature for external 

sensor (anti-freeze 

protection)

1.) 1°C - 10°C

2.) Exceed 10°C, screen display            , low temperature 

protection was cancelled.

5°C

A8

Setting temperature lowest 

limit

1°C - 10°C

5°C

A9

Setting temperature highest 

limit

20°C - 70°C

35°C

AA

Descaling function

0: Close descaling function.

1: Open descaling function ( valve is continuously closed 

over 100 hours, it will be opened for 3 minutes automatically.

0: Close descaling 

function

Ab

Power with memory function

0: Power with memory function.

1: Shutdown power after power off

2: Shutdown power after power on

0: Power with 

memory function

AC

Weekly programming 

selection

0: 5 + 2 ( 5 we 2 weeekend days) etc.

1: 6 + 1

2: 7

0: 5 + 2

Ad

Restore to factory defaults Displaying A0, press               key until whole LCD 

show all icons

Thermostat Program Mode

There are 3 period modes: 5 (weekdays) + 2 (weekend days), 6 + 1 and 7 days. Choose period of your 
choice by long pressing                for 3-5 secs. Enter into prgrammable mode. Then short press        
              choose: hour, minute time period and press         and         to increase and decrease values. 
Once finished setting after 10 seconds thermostat will automatically save & exit.

Advanced Options

The optimum comfort temperature is 18°C - 22°C

With the thermostat turned off, long press                for 3-5 secs. to access advanced settings.
From A1 to AD short press               to toggle through the options. Adjust data by using the up        
and down          arrows. Short press               to go to next option. After about 5 secs. the thermostat 
will save & exit on its own.

OK

Summary of Contents for Wi5 Wi-Fi Series

Page 1: ...ensions 86 x 86 x 27mm A Includes built in sensor and external sensor B 0 5 C accuracy keeps temperature within the level you set C Child lock to prevent children from operating the thermostat D Data memory when power is off E Holiday mode to allow you to enjoy a more comfortable temperature for when you get back home Before Wiring Installation 1 Read these instructions carefully Failure to follow...

Page 2: ...ong press for 3 5 secs to enter into PROGRAMMABLE MODE 3 Turn OFF thermostat Long press for 3 5 secs to enter into ADVANCED MODE C 1 Confirm key Use it with key 2 Only short press to set time 3 Turn on thermostat long press for 3 5 secs to enter holiday mode setting OFF Will appear use the up and down arrows to change to ON and then press the to confirm holiday mode set D 1 Down Arrow Decrease Val...

Page 3: ...ection was cancelled 5 C A8 Setting temperature lowest limit 1 C 10 C 5 C A9 Setting temperature highest limit 20 C 70 C 35 C AA Descaling function 0 Close descaling function 1 Open descaling function valve is continuously closed over 100 hours it will be opened for 3 minutes automatically 0 Close descaling function Ab Power with memory function 0 Power with memory function 1 Shutdown power after ...

Page 4: ...om the date of purchase The Smart Heating APP allows you to setup and control your Wi5 Wi Fi thermostat from anywhere in the world where you have a Wi Fi or data connection The APP is available on both IOS and also Android To download the APP please scan the following respective QR Codes with your phone You may have to install QR Code scanning software or apps on your device for this step Once you...

Reviews: