SUMMIT
FULL
BOOKCASE BED
w/ SINGLE 4 DRW STORAGE
465
5
/
465
8
/465
9
/4695
PARTS LIST
A)
8 –
100mm
Decorative
Head
Lag Bolts
B)
1- Headboard Assembly
C)
1- Footboard Assembly
D)
2 -5 1/4" x 75" Mattress Rails w/Support Cleats.
E)
3 -3
1/2
” x 38
3/4"
(Twin)
Individual slats
F)
10
-1 ¼” Wood Screws
G)
1 –
4mm
Driver for power drill
H)
4 - Silver drawer pulls (box in drawer unit)
I)
8 - 1 1/2" Pan head machine screws (box in drawer unit)
J)
1 - Silver Knob (stapled to inside of Footboard Door)
K)
1 - 3/4" Pan head machine screw (packaged with knob)
NOTE:
Make sure you have all parts before beginning assembly. If you need a part, contact the dealer where
you purchased your bed.
1)
Attach mattress rails
(D), to headboard (B), and footboard (C) with eight lag bol
t
s and tighten.
2)
Spread Slat roll out across bed frame from end to end. Place wood screws in 4 outside corners with
slat
pushed tightly up against the footboard/headboard. Place 3 loose slats into gaps in slat roll, an
screw down
with wood screws. See Slat installation information on following pages.
3) Install pulls on drawer fronts and knob on footboard door with supplied machine screws, and slide 4Drw
Underdresser into position below mattress rail on your choice of side of bed.
4)
Add the proper thickness innerspring bunk mattress
. See Living Spaces for details.
