DEIII
LIVI NG SPACES
4697 SUMMIT TRUNDLE BED
PARTS LIST:
7030-00335
A)
1 - Trundle Facia w/ holes for Pull handles
B)
1 - 74" Back Frame rail
C)
3 - Cross slats w/ holes for Caster wheels (Note: Casters are not included for the holes in the "center" slat)
D)
12 - 4" Decorative Lag Bolts
E)
4 - Casters w/ inserts
F)
2 - Cup Pull handles
G)
4 - 1 1/2" Combo Truss screws
ASSEMBLY INSTRUCTIONS:
*Make sure you have all parts before beginning assembly. If you need a part, contact the dealer where you
purchased your bed.*
I) Attach the Front facia (A) to the bottom slats (C) using 6 of the 1
00
mm Decorative Lag Bolts (D). Then attach
the Back frame rail (B) to the opposite side of the slats using the other 6 - 1
00
mm Decorative Lag Bolts (D).
2) Tum Trundle over or upright to install plastic inserts into the bottom side of slats (C)
3) Install Caster Inserts into the outside 4 predrilled holes of the slats (C). Push far enough in, that the round
plastic stop on the insert is flush with the wood. Install caster by pushing metal post into plastic insert until
you feel or hear a "click". Tug on caster, it should stay in the insert. If not, push further.
4) Place trundle bed upright with wheels on the floor
. Install cup pull handles with
4 Combo Truss screws.
5)
Lay included bunkie mattress on slats (C) between front facia and back frame rail. Roll under bed.
