Livith Ladders, Manual

10 

WARRANTY TERMS AND CONDITIONS

Livith Warranty does NOT cover:

System malfunctions or damages to its components due to failure to comply with the 

assembly and installation instructions given in this manual.

System  malfunctions  or  damages  to  its  components  due  to  the  use  of  unqualified 

installers and/or to non-compliance with the state of the art.
Malfunctions of the system or damages to its components due to unforeseeable force 

majeure causes (such as particularly severe environmental conditions, lightning, 

earthquakes, tornadoes, floods, fires, vandalism, natural disasters, wars).

System malfunctions or deterioration of its components due to failure to comply with the 

periodic maintenance and inspection times recommended in this Manual.

System malfunctions or damages to its components due to modifications or alterations of 

the products not authorized by Livith, as well as the use of non-original Livith components 

or accessories.
System malfunctions or damages to its components due to incorrect storage and/or 

transport before and during the installation phases.
Even in the cases of validity of the guarantee, it does not include the costs due to the 

disassembly, reassembly and transport of the replaced product, as well as the purchase 

and/or the supply of the material necessary for the restoration of the various components.

The warranty does not cover the costs of replacement and correct restarting of the system 

and of its components following events of falls from height.

Periodic checks

The periodicity of checks at sight must be daily and in the case of non-daily use, each time 

before use.

Here after are the most significant checks to be carried out:

•  integrity of the uprights and of steps/rungs

•  integrity of the anchoring device to the wall

•  integrity of the coupling of the connection pin between the modular components 

when included

Periodically carry out general cleaning of the ladder, using a mild detergent.

Any repairs must be carried out only by the manufacturer, in order not to lose the validity 

of the certifications issued by the manufacturer for himself each type of ladder.

In case of replacement of components or accessories, only original elements must be 

used