Air speed adjustment
In this mode, you can press the air speed adjustment key to select the purification speed
and operation mode.
1
st
gear: The first air speed gear indicator will light up, the purification air speed is low, and
the outer ring will flash slowly;
2
nd
gear: The second air speed gear indicator will light up, the purification air speed has
increased slightly, which makes it suitable for slightly better air quality. The outer ring will flash
at medium speed;
3
rd
gear: The first and second air speed gear indicator will light up simultaneously, the
purification air speed is high, and the outer ring will flash at high speed.
Auto mode: The Auto indicator will light up, and the device will automatically adjust
the air speed based on the air quality detected by the sensor; this is suitable for most purposes.
Sleep mode: The purifier runs at 1st speed. Besides the sleep indicator and the air speed
key, which will be half-lit, all the lights will be off.
Light button
Press the light button for 3 seconds to turn on/off the light button function. By default, this
function is turned on when the power is turned on. When the light button is turned on,
the light indicator is always on, and other indicators are normally displayed; the light
indicator is turned off when the light button is turned off. The indicator light is half-lit, and
the other lights are all off, but the other operating status of the machine remains
unchanged. This means the machine can be operated normally. It will remain active for
another 2 seconds after operation.
Filter reset
When the machine is operating normally, the filter button will always be white. When the
service life of the filter is about to expire, the filter reset button will start to flash. When the
filter life has expired, the filter reset button will turn red, prompting to replace the filter. Once
the filter has been replaced, you can reset the filter service life by pressing this button for 3
seconds until the red light goes out and the white light comes on.
Child Lock button
Press and hold the filter reset air speed button for 3 seconds while the unit is
on; the child lock indicator will light up and the purifier will beep 3 times to enter child lock
mode, None of the buttons (including ON / OFF button) will work. No matter which button is
pressed, the child lock indicator will blink 3 times silently to remind you that the device is in
child lock mode. To exit this mode, please press and hold the filter reset button and air speed
button together for 3 seconds. The child lock indicator will turn off, and the device will beep
once. All buttons will function normally again.
PRODUCT CONFIGURATION AND PARAMETERS
Rated voltage:
230V/50Hz
CADR (particulate matter):
150m3/h
Rated power:
28W
Noise:
30-50dB
Material:
ABS
Application area:
10-18
㎡
Product size:
203*203*327 mm
Product weight:
2.3KG
MAINTENANCE
Before performing maintenance, make sure that you have turned off the power and turned off the
device by pressing the button (5).
You can use a slightly damp cloth to clean the product body.
