SECTION 2: INSTALLATION
Tools required
Magnetic Screw Driver .
Content of the package
Mounting materials, remote control, batteries, user manual, electric fireplace.
2.1 Unpacking the Fireplace
WARNING!
Do NOT use this appliance if any part has been under water. Immediately
call a qualified service technician to inspect and to replace any part of the electrical
system if necessary. Keep plastic wrapping away from children.
•
Open the packaging carefully and remove the foam; make sure that the appliance is intact, has no
signs of damage caused by transport, and no part of it has been exposed to water. If in doubt, do
not use the appliance and contact an authorized service center.
•
Remove and discard the plastic bag.
•
Be responsible when handling the packing materials.
•
Keep the original packaging because this may be needed if you have a complaint about the product
or for future transport and/or storage.
•
Make sure that all parts are removed from the packing.
•
Keep little children away before and during installation. Be aware that the little children do not be
in contact with the parts.
•
The electric fireplace can be installed almost anywhere in your home. Please, read and follow the
instructions carefully by choosing a location. For the best result, install the electric fireplace not in
direct sunlight.
•
The appliance should be connected to an earthed electrical outlet that can be easily accessed to
disconnect the device.
