User manual
4
TECHNICAL CHARACTERISTICS
Voltage:
AC 220-240V 50-60Hz
Power:
1850-2200W
USE OF THE APPLIANCE
Before using the kettle for the first time, fill the kettle with cold water and boiled it twice without any
additives.
•
Fill the kettle with water (fig 2). Do not overfill. Use the water level indicator.
•
Place the kettle on the base (fig 3).
•
Electrical Connection
o
Check whether the electrical voltage which you intend to use is the same as that of the
kettle. Details can be found on the label on the base of the kettle.
o
Only connect the kettle to a properly installed 220-240V~ 50-60Hz socket.
•
Switch the kettle to position ‘1’ (fig 4). The control lamp on the water indicator shows that the
water is being boiled.
•
After boiling, the kettle switches off automatically.(fig 5)
•
Disconnect the kettle from the mains electricity supply.
•
Do not open the lid when pouring.
•
If the kettle is overfilled, boiling water may be ejected.
•
The kettle is only to be used with the stand provided.
CLEANING AND MAINTENANCE
Always remove the plug from the mains supply before cleaning the kettle.
The exterior of the kettle should be cleaned, if necessary, with a slightly damp cloth without additives.
The calcium filter can be removed for cleaning
Do not immerse the base of the kettle
