22
User’s manual
EN
ADJUSTMENTS
The user must make any adjustments according to the procedures described
•
in this manual. Do not make any adjustment which is not expressly indicated
in this manual.
Any special adjustments, not expressly indicated in this manual, must only
•
be carried out by personnel from the Manufacturer’s Authorised Service
Centres.
RECOMMENDATIONS FOR THE ADJUSTMENTS
ADJUSTMENT OF CUTTING HEIGHT
Reduce the cutting height gradually. It is recommended to add the spacers every
2÷3 days in order to gradually reach the ideal height of the grassy surface.
INSERTING SPACERS
WITH SCREWS
INSERTING BLADE
WITH SCREWS
check that the slope of the blade,
with the robot in the start position,
is facing downwards.
1 – Stop the robot safely by pressing the
ON/OFF key (see “Robot safety stop”,
page 26).
2 – Turn over the robot and position it so
as not to ruin the covering hood.
3 – Unscrew the screws to remove the
blade.
4 – Insert one or more spacers to adjust
the cutting height as shown in the table on
page 9.
5 – Reposition the blade (see page 35) and
fasten the screws.
6 – Turn the robot over to its operating
position.
Important
Use protective gloves to prevent
damage to your hands.
Important
Important