28
User’s manual
EN
PROLONGED INACTIVITY AND RESTARTING
If the robot has not been used for a long period of time, it is necessary to carry out a series of
operations to guarantee the correct functioning at the time of its reuse.
1 – Accurately clean the robot (see “Robot Cleaning”, page 30).
2 – Recharge the battery at least every 5 months for lithium batteries.
3 – Store the robot in a protected and dry location with an ambient temperature between 10° and
30 °C, out of reach of children, animals, etc.
4 – Disconnect the power point from the power supply unit.
Restarting
Follow these procedures before restarting the robot after a long period of inactivity:
1 – Connect the plug of the power supply unit to the electrical outlet.
2 – Reactivate the main electrical power supply.
3 – Place the button of the power supply unit on “ON”.
4 – Recharge the batteries of the robot for at least 12 hours.
5 – Once the recharging has been completed, operate the robot normally.
BATTERY RECHARGE AFTER PROLONGED INACTIVITY
Position the robot next to the recharging zone.
Check that the recharging knobs on the wheels are clean.
1.
Check that the power supply unit is connected to the electrical power (110V or 220V).
2.
Connect the black plug to the wheel containing the black “-” symbol.
3.
Connect the red plug to the wheel containing the red “+” symbol.
4.
Once connected, the robot automatically turns on to show the recharging level of the batteries.
5.
(see “meaning of LED combination” on page 25).
At the end of the charging. First disconnect the red cable and then the black one. Press the
•
“OFF” key.
Recharge the battery at least every 5 months for lithium batteries.
Important