29
User’s manual
EN
OPERATING TIPS
Below are some instructions which must be followed when using the robot.
Even after being suitably informed on the use of the robot, simulate some test manoeuvres
•
on fi rst use to identify the commands and main functions.
Check and secure the fastening screws of the main organs.
•
Mow the lawn frequently to avoid excessive growth of the grass.
•
Do not use the robot to mow grass which is shorter than 3 cm (1.18 in..) in respect to the
•
cutting blade.
If the lawn is equipped with an automatic sprinkler system, make sure the robot fi nishes its
•
work cycle at least one hour before the start of the watering to prevent damage to the robot
itself and to the sprinklers.
Check the slope of the ground and make sure the maximum values admissible are not
•
exceeded so that the use of the robot does not cause dangers.
When using the robot, make sure the area to mow is clear of people (in particular, children, the
•
elderly, or disabled people) and domestic animals to prevent safety risks.
To prevent this risk, it is recommended to program the production activity of the robot in
suitable times.
Do not start the robot in case of rain or strong humidity. The best results are obtained in the
•
middle of the day.
Frequency
Part
Type of maintenance
Reference
Weekly
Blade
Clean and check the
effi ciency of the blade
See “Robot
Cleaning”, page 30
Replace the blade
if bent due to an
impact or if it is worn
out.
See “Blade
replacement”,
page 35
Battery recharge
knobs
Clean and remove
any oxidations
See “Robot Cleaning”
Monthly
Robot
Clean the robot
See “Robot Cleaning”
ORDINARY MAINTENANCE
MAINTENANCE RECOMMENDATIONS
SCHEDULED MAINTENANCE TABLE
During the maintenance operations, use the personal protection equipment
•
indicated by the Manufacturer, especially when working on the blade.
Before carrying out any maintenance, make sure the robot was stopped safely
•
(see “Robot Safety Stop”, page 26).
Important