35
User’s manual
EN
RECOMMENDATIONS FOR REPLACING PARTS
BLADE REPLACEMENT
1 – Stop the robot safely (see
“Robot safety stop”, page 26).
2 – Turn over the robot and
position it so as not to ruin the
covering hood.
3 – Unscrew the screws to
remove the blade.
4 – Insert a new blade and
fasten the screws.
5 – Adjust the cutting
height (see “Cutting height
adjustment”, page 22).
6 – Turn the robot over to its
operating position.
ROBOT DISPOSAL
Do not throw polluting material into the environment. Dispose of the robot in
compliance with the applicable laws and regulations.
BLADE 2
Carry out the replacement operations and repairs according to the Manufacturer’s
instructions, or contact the Service Centre if these operations are not included
in the manual.
INSERTING BLADE
WITH SCREWS
check that the slope of the blade,
with the robot in the start position,
is facing downwards.
Important
Use protective gloves to
avoid the risk of cutting your
hands.
Important
Warning - Caution