2
GB
Instruction Manual Pressing Tool
authorised
copy
2. Warranty
If the tool is operated according to its intended use and the regular maintenance services are observed our war-
ranty is 24 months from the time of delivery. Worn-out parts resulting from their intended use are excluded. We
reserve the right to rework the tool in case of a justi
fi
ed warranty claim.
3. Description of the battery operated electro-hydraulic pressing tool
3.1 Description of the components
The hydraulic tool is a hand guided tool and consists of the following components:
Table 2 (see page I, pic.1)
Pos. Description
Function
1
Pressing head
Working unit to accommodate the pressing jaws
2
Retract slide
Slide to open the pressing jaws in case of an error or emergency
3
LED (red)
Indicator for battery charge, service Intervals and faults
4
Battery lock
Slide to unlock the battery
5
Battery
Rechargeable Li-Ion battery 18V
6
LED (white)
to illuminate the working area
7
Trigger
Actuator to start the pressing cycle
8
Pressing jaws
dies to press the
fi
tting on the pipes (will be supplied by the system provider)
9
Locking pin
Pin with special lock to open/close the pressing head
3.2 Brief description of the important features of the unit
Safety features:
The unit is equipped with a special brake which instantly stops the forward motion of the piston/dies when the trigger
is released.
A white LED illuminates the working space after activating the trigger. It automatically switches off 10 sec. after relea-
sing the trigger. This feature can be deactivated (see page IV),
HE.16074_B © 08/2014
MAP2L19LK
