L A B W A R E
®
6
The LLG-uni
PERISTALTICPUMP
3 pump has a
mechanical keypad with a life of
300,000 cycles to fully meet the needs of
various environments.
1.
Digital knob:
Turn the speed control
knob to the left or right to decrease or
increase the speed. The speed range is
0.1-150 rpm.
2 Continuously pressing the knob will let
the motor run at the highest speed in the
current direction. The display shows the
full speed and maximum speed. Release
the button to stop, the screen displays the
stop state and the original speed.
3. Press the knob in the stop state to enter
the RS485 communication address
adjustment. The two digits in the lower
right corner of the screen flash, turn the
knob left or right to decrease or increase
the communication address. The address
adjustment range is 1-32. After adjusting,
press the knob again to exit the address
adjustment state.
4.
Start/stop button:
Change the motor
status. Press once, the pump will start,
press again, the pump will stop.
5.
Direction button:
Change the direction
of the motor. Pressing the button again
changes to the other direction.
100.0
V
01
Speed
Adress
Analog speed control
Working status
EXT
Control
knob
Start/Stop
External button
Direction
3.2 Screen and keypad
Picture 6
Picture 7
Summary of Contents for uniPERISTALTICPUMP 3
Page 10: ...L A B W A R E 10 Notes ...
Page 11: ...INSTRUCTION MANUAL 11 Notes ...
