INSTALLATION
29
Note:
“For Windows, Install Driver First”
For Windows PC: the Thunderbolt certified device driver
must be installed before plugging in the device for it to
function properly.
1.5.3.2 Configure RAID Volumes
There are often multiple ways to accomplish the same configura-
tion and maintenance tasks for your RAID storage. Your Thun-
derBox 600 RAID storage can be configured by one of the fol-
lowing methods:
1. McRAID Storage Manager from ArcHTTP. (Thunderbolt port)
2. McRAID Storage Manager Through LAN port.
3. LCD Panel with Keypad.
10. The ArcHTTP and CLI are installed at the same time on
ThunderBox 600. Once ArcHTTP and CLI have been in-
stalled, the ArcHTTP background task automatically starts
each time when you start your computer. There is one
MRAID icon showing on your “Programs” folder. This icon is
for you to start up the McRAID storage manager (by
ArcHTTP) and CLI utility. If you have not yet installed the
hardware, please follow the “1.5.1 Physically Install RAID
Storage and Drives” section to install it. Otherwise, to
begin the creation volume, go on the “1.5.3.2 Configure
RAID Volumes” section to configure the volume.