INSTALLATION
12
2. Installation
This section describes how to install the ThunderBox 800 with host
computer and disks.
2.1 Before You First Installing
Thanks for purchasing the ThunderBox 800 as your RAID data stor-
age. The following manual gives simple step-by-step instructions
for installing and configuring the ThunderBox 800.
Unpack
Unpack and install the hardware in a static-free environment.
ThunderBox 800 is packed inside an anti-static bag
between two sponge sheets. Remove it and inspect it for dam-
age. If the ThunderBox 800 appears damaged, or if any items of
the contents listed below are missing or damaged, please contact
your dealer or distributor immediately.
Checklist
• 1 x ThunderBox 800 8-bays RAID storage unit
• 1 x Installation CD – containing driver, relative software, an
electronic version of this manual and other related manual
• 1 x RJ-45 LAN cable
• 1 x Power cord
• 32 x Drive mounting screws (4 per drive tray)
• 1 x Quick start guide
System Requirements
• Computer with Thunderbolt connector
• Thunderbolt cable
• Mac OS X 10.8.5 or higher
• Windows 7&8
“For Windows PC: the Thunderbolt certified device driver must be
installed before plugging in the device for it to function properly”
