© LNS FOX Instruction manual series WS (USA) pag. 4 of 28 - rev. 06-2014
Fig. 1 b Labels location
1.2.2. Main safety prescriptions:
a) This instruction manual must be read entirely before installing, starting and operating on the unit
b) Ensure that the power supply is isolated before working on the unit.
c) During installation or maintenance make sure that the operator wears appropriate safety protection clothes.
1.3. Range of applications:
1.3.1. Intended uses
The WS oil mist filter line is designed for:
•
Filtration of mist, vapors smoke and odors created by oil and emulsion used on machine tools. The
elimination of smoke and odors is also possible by adding an additional filtration module.
1.3.2. Not intended uses
•
Filtration of potentially flammable vapors
•
Filtration of substances potentially explosive
•
Filtration of solvent, paint or other adhesive substances
•
Filtration of acids and or corrosive substances
“Personal safety– integrity of the unit”
LNS FOX declines any responsibility for possible injuries to people and/or damages to
objects due to incorrect utilization of the unit.
1.3.3. Operating conditions
Operating conditions must be within the following ranges:
•
Temperature: from 41 to 104 Fahrenheit
•
Relative humidity of the environment: from 30 to 85%
•
Relative humidity on the unit’s inlet: from 30 to 98%
