© LNS FOX Instruction manual series WS (USA) pag. 6 of 28 - rev. 06-2014
1.7. Warranty
LNS Italia, the supplier, guarantees its products for 365 days starting from the date of the installation which,
unless specifically agreed must not be over 60 days from the delivery date.
The warranty is ex works and, upon discretion of the supplier is limited to the repair or replacement of the product
once proven to be defective or not appropriate for the use it was designed for.
The buyer is responsible for officially reporting the supplier within 7 days the anomaly found. In addition, the
buyer is also responsible for having the product at the supplier’s disposition.
If necessary, in order to avoid further damages or following a specific request from the supplier, the buyer is
responsible for stop using the unit from the time when the failure is found.
Lack of communicating the problem within 7 days or additional damages done to the unit due to its continuous
use, can result, upon discretion of the supplier, in a reduction or cancellation of the warranty.
The warranty is ex works unless specified by the supplier.
In the event of repair works done on the customer’s site the warranty does not cover travel related expenses.
The warranty does not apply in case of damages caused by improper and/or not according to this manual use of
the unit. Every attempt to repair the unit by personnel not authorized by LNS Italia will result in a reduction or
cancellation of the warranty. Except in the case of intentional malpractice of the supplier, the monetary
compensation for damages can not exceed the cost of the unit. LNS Italia is not liable for indirect damages.
2. Handling, transportation and storage
2.1. Movement and transportation of the packaged unit
“Personal safety – integrity of the unit”
LNS FOX declines any possible responsibility for possible injuries to people and/or
damages to objects due to movement procedures not conforming with safety standard.
Unit must be handled by qualified personnel properly trained for utilization of tools and machines dedicated for
the movement of the goods. Weights of the units and indications on how to move it are indicated on the
packages.
2.2. Movement and transportation of the unit
Each unit is equipped with 4 eye bolts that must be used only for moving the unit.
“Personal safety – integrity of the unit”
Lifting operations must be undertaken by trained personnel with adequate lifting
devices.
The unit must be lifted with wire ropes having proper load capacity. The rope must be tied to the eye bolts.
2.3. Storage
Units must be kept in a dry environment and conditions must be within the following ranges:
•
Temperature 32F – 104F
•
Relative Humidity: 30 – 80 %