LOADRITE SPRINT OPERATORS MANUAL
9
3 Weighing Overview
Weighing Mode
While individual bucket weight can be measured, the Loadrite also has an
ability to accumulate how much weight you have loaded on to a truck. This
weighing mode is called Total mode. This is, as you add bucket loads, the
weights are added to the totals. The short total is displayed.
Short and Long Totals
The Loadrite keeps a total of the bucket weights that you add. Two
independent totals are stored.
Short Total
Typically used to display the total weight loaded
onto a truck.
As you add successive loads, the Loadrite
displays the updated Short Total (sum of the
loads so far) on the Ready screen.
Long Total
Typically used to accumulate the weights
loaded over a longer period, for example a shift
or a day.
Long total may be viewed via menu. See page
20.
Accurate Weighing
For accurate weighing, make sure that:
•
The bucket or forks are fully rolled back for each lift.
•
The loader is stationary.
•
The lift arms start well below the trigger point. This ensures that all
acceleration and load bounce has been eliminated well before the
trigger sequence begins.
•
The Loadrite is correctly zeroed. (Zeroing is described on page 13).
Summary of Contents for LR911
Page 1: ...Weighing System MANUAL OPERATORS ...
Page 2: ......
Page 4: ......