LOADRITE SPRINT OPERATORS MANUAL
10
General Method of Weighing
1.
BUCKET BACK
. After picking up material into the bucket, roll the
bucket back.
2.
LIFT
. Raise the load smoothly past the trigger point using normal
engine revs. (The trigger point is where the metal plate passes the
body of the trigger). For best results, operate the lift lever before
accelerating the engine so that the machine does not rock as it lifts.
The Loadrite beeps, turns the TRIG light on and displays the load.
(See also page 5).
3.
ADD
. The Loadrite waits for a few seconds for you to take one of the
following actions:
•
Press
to add the weight to the long and short totals, or
•
Press
to subtract the load from the totals, or
•
Press
to zero the measuring system.
If you don’t press a key, the Loadrite beeps and prompts you to take
action. The Loadrite then counts down and if you still don't press a
key, it discards the weight and goes back to the
Ready
state.
Summary of Contents for LR911
Page 1: ...Weighing System MANUAL OPERATORS ...
Page 2: ......
Page 4: ......