Note
: Use These Instructions for
Standard
Installations
LNI 2000 Installation Manual
About the LNI 2000 and IP
Addresses
The LNI 2000 is designed
both to
provide
and to
obtain
an IP address
automatically.
The “Local” Ethernet port
on the LNI provides an IP
address to the PC used to
program the unit.
The “Internet” port tries to
obtain an IP address from
the network. This setting
can be changed to a static IP
address during
configuration of the LNI
2000.
Alarm Panel Programming May Be
Required
Alarm panel ID:
This number may have to be re-
programmed on the alarm panel if it
has been changed as a part of this
installation. See the LNI
Pre-Installation Site Survey for
more information.
Alarm center receiver phone
number:
This number may have to be re-
programmed on the alarm panel if
has been changed as a part of this
installation. Note that the alarm
panel may have to be reconfigured
for Dual Tone Multi-Frequency
(DTMF) dialing because the LNI is
not compatible with pulse dialing.
See the LNI Pre-Installation Site
Survey for more information.
40