Replacing and Installing a New Remote Control (EL20/EL21)
Repair Instructions
Replacement Remote Controls:
EL20 2-Function Wireless Remote Control
E578 Transmitter (Key Fob)
E579 Receiver
EL21 20-Function Wireless Remote Control
E583.1 Transmitter (Controller)
E582.2 Receiver
6
Ensure all wires are connected and reattach the control
panel to the red case using the (4) Phillips-head screws.
Take extra caution to feed all wires into the case and ensure
No wires are trapped between the control panel and the
red case.
Phillips
Screw
Driver
Control Panel - Closed
7
Turn on machine. Turn remote switch on control panel to
“ON”. Test the Feed and SWEEP functions using the transmitter.
Special Note: There will be a 20 second delay from the time
the machine is turned on before the remote functions become
active.