Phone: 800.526.4041
Fax: 818.764.6061
Author: JJ Contributors: RR, CT Original Date:11/2/12 Revision: 2/17/2022
TS- I have an Over-Current or Feedback Sweep/ Elevation Error.
Trouble Shooting Instructions
Hopper Unit.
Reconnecting The Hopper Unit To The Base Unit.
Step 1.)
Using two people, lift the Hopper Unit (A) and
hold it above the Base Unit (E). Connect the Wire
Connector (B). Now CAREFULLY lower the Hopper Unit
onto the Base Unit. There are 4 metal extensions on the
bottom of the Hopper Unit (A) that will fit into the 4
holes on the Base Unit (B). They will “click” into place
when properly aligned.
Step 2.)
Use the 4 wings provided (D), and the 4
washes provided (C ) to secure the Base Unit to the
Hopper Unit from the underside, as depicted in the
picture to the right.
Make sure the 4 Wings are finger tightened, and do not
over tighten, for over tightening these Wings can cause
and Over-Current Sweep Error.
If the issue continues upon putting the machine
back together and testing it, you will need to
contact Customer Service for a Return
Authorization to send your machine in for Repair
or Warranty Repair. 1-800-526-4041.
Phenom Hopper Unit, and Base
Unit
How to Order Elite Replacement Parts
Elite Parts
Website:
http://www.lobstersports.com
Email:
sales@lobstersports.com
Phone:
800.526.4041
Fax:
818.764.6061
We accept Visa, MasterCard or Discover & PayPal
