Phone: 800.526.4041
Fax: 818.764.6061
Author: JJ Contributors: RR, CT Original Date:11/2/12 Revision: 2/17/2022
TS- I have an Over-Current or Feedback Sweep/ Elevation Error.
Trouble Shooting Instructions
diagrams to the right to make sure all wires are
connected to the correct harness plugs.)
2.
Diagram A. shows that the Elevation Wire
(coming from the elevation motor.)
connects to the Elevation Position plug
(with the red, black and blue wires, and
Elev Pos label.)
Elev Pos quick disconnect
(Red black, and
blue
wires)
3.
Diagram B. shows that the Sweep Position
Wire (coming from the sweep motor.).
connects to the Sweep Position plug (with
the red, black, and orange wires, and Sweep
Pos label.).
