QUICK START-UP GUIDE
PHENOM
TM
CALIBRATION
1.
Start by centering the machine on
the courts center mark, directly
behind the baseline.
2.
Press power button
and wait
for automatic calibration to complete.
3.
Press the test button
.
The
machine will launch one ball
over the net to the opposite court
towards the “T” where the center
and service line meet.
4.
The ball should land within a 2 foot radius of the “T.”
If the test ball lands too near or far from the “T,” use the
/
buttons to adjust the distance, retest. If the ball
lands slightly right or left, nudge the front of the
machine to the right or left and retest.
5.
Once the test ball lands in the correct spot, press
or one of the training modes and press
.
test
#1
#3
QUICK SET-UP GUIDE
PHENOM
TM
BRAKE
Set the brake before use
:
Push on the brake pad with
your foot until you hear or
feel the brake engage.
Confirm that the front
wheels are still positioned
over the baseline, at the
court’s center mark.
Remove the brake after
use
: To disengage the
brake, step on the red
base with your foot,
pushing forward with your
body weight.
Set
Release
See reverse side for programming instructions
QUICK SET-UP GUIDE
PHENOM
TM
BRAKE
Set the brake before use
:
Push on the brake pad with
your foot until you hear or
feel the brake engage.
Confirm that the front
wheels are still positioned
over the baseline, at the
court’s center mark.
Remove the brake after
use
: To disengage the
brake, step on the red
base with your foot,
pushing forward with your
body weight.
Set
Release
See reverse side for programming instructions
If you have questions about your machine, DON’T contact your
dealer; please call Lobster Sports directly at 800.210.5992
QUICK START-UP GUIDE
PHENOM
TM
CALIBRATION
1.
Start by centering the machine on
the courts center mark, directly
behind the baseline.
2.
Press power button
and wait
for automatic calibration to complete.
3.
Press the test button
.
The
machine will launch one ball
over the net to the opposite court
towards the “T” where the center
and service line meet.
4.
The ball should land within a 2 foot radius of the “T.”
If the test ball lands too near or far from the “T,” use the
/
buttons to adjust the distance, retest. If the ball
lands slightly right or left, nudge the front of the
machine to the right or left and retest.
5.
Once the test ball lands in the correct spot, press
or one of the training modes and press
.
test
#1
#3
If you have questions about your machine, DON’T contact your
dealer; please call Lobster Sports directly at 800.210.5992
