ⱥㄒ㸭(1*/,6+
STORAGE
ە
Store in a place which is well-ventilated and free from excessive dust and humidity, and where there
is no danger that the tool will fall.
ە
If not using the tool for an extended period of time, carry out a maintenance inspection before storing
it away. (Refer to “Maintenance” on pages 9 ~ 15.)
ە
To increase the working life of the tool, it is recommended that you give it periodic overhauls.
ࠉ
Contact the place of purchase or your nearest “LOBSTER” dealer for any overhauls and repair work
ࠉ
required. (A charge will be made for this service.)
Viscosity ISO
ࠉࠉ
: VG46
Viscosity Index
ࠉࠉ
: 113
Viscosity at 40
Υࠉ
: 46 c.s.t.
Viscosity at 100
Υࠉ
: 7.06 c.s.t.
Flash Point
ࠉࠉࠉ
: 228
RECOMMENDED OILS are:
Shell Tellus No. 46
Esso Teresso No. 46
Mobil D.T.E. 25 Oil (Medium)
HYDRAULIC OIL REQUIREMENTS
Use only clean hydraulic oil, as the viscosity of the oil used will affect tool performance.
“LOBSTER” brand Hydraulic Oil is supplied in a plastic filler bottle with the tool, and can also be obtained
from your “LOBSTER” dealer or agent in your town. If this is not possible, a good quality mineral oil with
the following properties should also be used.
19
ORDERING PARTS
Indicate the tool model, part name, code no. and quantity as shown below when ordering.
Model
R1A1
R1A1
Part Name
Ultra Jaws (pair) ‘M’
Frame Head ‘CJM’
Code No.
Qty.
1
1
10281
64055
ە
When parts are modified for improvement, the older parts are kept in stock for a period of five
years.
Note
