Handheld
•
To replace batteries use 2 x AAA 1.5 volt or equivalent (Also see
Setting up your Loc8tor on page 4)
•
A low battery icon will appear in the top right hand corner of the
screen when Handheld batteries are running low. Batteries are able
to be used until screen starts to fade.
Please Note - Battery life will vary depending on mode and frequency
of use.
Tags
•
To change the batteries - there is a hole which you can thread the
lanyard through. Put your thumb nail or other flat tool at this end into the split line (line going around
the middle of the Tag). Keeping your thumb / flat tool in the split line move it around to the middle of
the long side. The Tag will pop open.
-
Replace with SR54 (silver oxide) 1.5v button cells or equivalent to provide best battery life, keeping
the plus side face up nearest the lanyard hole.
-
Replace the lid by putting one side in first then pushing shut.
-
If batteries are correctly inserted Tag will beep when case is closed.
•
If you locate a Tag and its battery is low a low Tag battery icon will appear in the Tag Settings screen
(Blue button) on the very right hand side of the screen. The Icon will appear in line with the Tag that
needs to be changed. Replace Tag batteries when icon is displayed to ensure Tag does not become
lost.
•
The Loc8tor and Tags have not been designed to be waterproof. Please take care not to get wet.
•
Never clean with water, detergent or cleaning agent - simply use clean, dry cloth.
•
On the reverse of the Handheld lid are two black lines. These are aerials and essential to the
functioning of your Loc8tor. Take care not to scratch.
•
Tag and Handheld operational temperature is between 0˚c to + 55˚C. Storage temperature is between
- 10˚c and + 60˚c.
BATTERIES
GENERAL CARE
10
