The Blue button (Tag Settings screen) controls your Alert settings. It enables you to decide what mode
each Tag is in, Locate or Alert, and to set the distance for your required safety zone (Near, Medium or Far)
for each Tag. Once you're happy with your settings simply press the Red button to activate Alert.
All Tags with a ( ) will now automatically be in Alert mode.
Setting up Alert (Blue Button - Tag Settings Screen)
•
Attach Tag in or on item to be protected
•
Press Blue button for Tag Settings screen. A list of all your Tags will be displayed
Selecting the Safety Range (1 )
•
Scroll to the right hand column in line with selected Tag
•
Use White button to select distance between Tag and your Handheld
N = Near, M = Medium, F = Far
Set Tag Mode
•
Scroll to column with dash (-) next to the Tag name
•
Press White button to make Tag alertable ( )
Repeat this process for each Tag
Using Alert Mode
•
Press Red button to turn Alert mode ON or OFF for all Tags with ( ) in Tag settings screen
•
The Tag will beep to confirm Alert mode is ON.
Your Tags are now in Alert. Should any Tag set in Alert mode go out of the preset safety zone the
Loc8tor Plus will vibrate, set off an alarm and advise which Tag has gone astray
An
will appear in the bottom right hand corner when the Alert mode is on
ALERT MODE - HELPS PREVENT ITEMS GETTING LOST
(Loc8tor Plus Model)
6
A
! Important Alert mode usability statement ! - A constant link between Handheld and Tag ensures you are
notified immediately when Tags go out of range. However if used continuously will significantly reduce battery
life. When not needed turn Alert mode off using Red button.
(1)
