11
3.4
MENU SET C: DATA LOGGING
Pressing the Down arrow followed by the Enter/Reset button will access the Data Logging menu set. This menu
set has three options that will display recorded data about the operation of the water heater. To access the
options, use the Up or Down buttons followed by the Enter/Reset button.
3.4.1
TOTAL HRS. RUN
The Total Hrs. Run option shows the total time that the burner in the water heater has been operating for since the
counter was last reset.
3.4.2
IGNITION ATTEMPTS
The Ignition Attempts option will show the number of times the water heater has attempted to fire since the counter
was last reset.
3.4.3
LAST 10 ERRORS
The Last 10 Errors option will show the date, time and fault description for the last ten errors that caused the boiler
the stop. The Up or Down button should be used to scroll through the errors
3.5
EXITING USER SETTINGS MODE
To exit the user-setting mode, the Menu/Exit button should be pressed whilst in the Main Menu screen.
Alternatively, if no button is pressed for 60 seconds, the water heater will revert to its normal operating screen.
Once this has occurred, the Enter/Reset button should be pressed to switch the unit on.
