Doc. Ref.No: Q875-0143/ENG
Issue 2
Met 30+ Operating Manual
12/01/10
8.2 Reports
8.2.1 Reject
Reports
8.2.1.1 Reject Report
A reject report occurs whenever metal is detected.
Format: {time-stamp} {Product name} {size} {phase angle)
8.2.1.2 Reject count
A new report for product and reject counts is created before the counts are cleared.
Format: {time-stamp} {Product count} {number} {Reject count} {number}
8.2.2 System Reports
8.2.2.1 Restart
A report is given each time the system is re-started.
Format: {time-stamp} System restarted - {Product name}
8.2.2.2 Product setup
A report is given each time a product is setup.
Format: {time-stamp} Product setup [{Product number}] {Product name}
8.2.2.3 Product Selected
A report is given each time a product is selected.
Format: {time-stamp} Product selected [{Product number}] {Product name}
8.2.2.4 Name Change
A report is given each time a product's name is changed.
Format: {time-stamp} Product name changed from {Product name} to {Product
name}
File Name: Q875-0143 ENG Iss2 Met30+ Operating.doc
Page 40 of 58
