6
Make sure your door is prepared for installation. If you need to drill new holes, please
use the supplied template for drilling holes. Before installing the Lockset , confirm the
door opening direction (Step 1) and ensure latch throw is on correctly oriented to the
door’s opening direction.
INSTALLING THE LOCKSET
Step 3
Insert Lockset onto door hole and secure with screws (top and bottom) .
Lockset adapter is included with your
interior door handle. The adapter is
installed according to the left or right
door direction. Install the adapter
according to the user manual of
your interior handle.
The Lockset adapter must
be installed according to
the left or right door
opening direction. Install it
on the door exterior.
If you are installing for a left
door, use the lockset
adapter F.
If you are
installing for a right door,
lockset adapter F1.
Ø1-11/32"(34mm)
Door Handle Hole
Baseline approximately 1
meter from the ground
Installation template
